Only installing a sump pump is not always enough in case of places like basements and other underground locations. You need a proper alarm system that will not ditch you at times of urgency. If you are in search of such a good quality sump pump water alarm system, then there are a number of such models available today from various brands. Some of the most likable and trustable models can be listed down as the following.
Top 5 Best Sump Pump Alarms Comparison Chart For 2020-2021
Control Products FreezeAlarm Homesitter Temperature, Water, Power Alarm HS-700
This model of sump pump high water alarm comes along with a number of features that can be helpful for you.
It is able to track temperature and can call out in the case of changes in the temperature noticed.
It also has a sensor that monitors the pipes that have leakage problem or floods in the basement or over-flowing of the pumps and others.
There is also an alarm call out when the power goes out.
Again there is an alarm when the battery is low.
When there is such an issue, the alarm alerts in three different telephone numbers.
This particular model of alarm is mainly a multi-functional monitoring system for the sump pumps. To install the alarm, you do not need such type of an expert help, and also, you do not require any type of fees for the installation. You may take just a few minutes for the installation process, and the only things that you need in this are an outlet for power and a telephone line. The alarm can be set on various residential projects such as your own house or a vacation property and others. The best part is that the alarm comes along with a warranty of one year from the manufacturer for better results.
The indoor alarm system of this model from the brand Zoeller is known for a number of features such as below:
The sound of the alarm is set at a decibel of 82 till 10’.
Also, there are options for getting the alarm horn on silence and then getting it auto reset.
There are terminal connections available for the float switch and the pump.
You get a 15’ cable along with the float switch.
The plug power cord is of 6 feet and has a capacity of power outlet 115 V.
The alarm system comes along with a battery backup of 9V, and the alarm is also supported by a light indicator apart from the horn sound. The system measures at 4.5” high, 7.5” wide and comes with a warranty of one year from the manufacturer. The alarm system is not only an ideal choice for any kind of residential apartments but also can be relied upon for any kind of commercial water related issues. Though the system is made only for indoor use but the best system is that you can get alerted even when you are out near the location.
This particular basement alarm system comes along with a number of specifications for your help.
The system is capable of monitoring the rise in the water level that activates the automatic pump very easily.
In case somehow if the first float does not get activated, the second float is activated immediately to help the drain work effectively.
There is a float cage available so that the debris does not become a hindrance to the flow of the water movement.
If the sump pump is allowed to run for about 10 minutes extra then it clears all the water so that the level is maintained.
The float can be installed easily at any of the levels with the use of a hose clamp and controller that is included with the system.
The amazing sump pump switch with the controller is made in Taiwan and has a number of additional features mentioned above. Apart from this, the system is compatible with almost all the sump pumps, and this can be the best part of the model. Not only for residential, but this model is also great for some of the commercial projects and places.
The entire installation under actual use condition is tested by the only sump pump monitoring system called the Beacon ProAct™ 200. Fresh water is delivered into the sump pit by this sump pump to check the installation. You can now regularly test your battery and backup pumps with the help of the Beacon ProAct™ 200. It can be tested even at the time of no rain. By checking and testing your sump pump regularly, you will get ample to time to hire a plumber to fix any issue before it becomes problematic.
You will get emails and texts every week from the Beacon Technical Systems, LLC so that you can be assured of the fact that all your sump pumps are working in good condition. You need not sit at your house all the time to worry about your sump pump. There are two bright green lights which indicate that both your float switches and pumps are working. If any failure occurs, you will be informed prior to the basement flooding so that you can fix the problem in advance.
The outdoor high water alarm of this brand is available with a number of special features.
The system is not only available for indoor but also for outdoor use and comes with an enclosure that is weatherproof.
The system has a horn sound the alarm and also is available an LED light as an indicator.
The system is easy to be installed and also can be mounted in a number of locations.
To support the system, there are 10 numbers of float switch and also has an AC cord of about 6’.
The model is made in the USA and has been designed mainly for the residential use. The light indicator of the system can be noticed even from 100 feet distance, and the red light is flashed when the alarm starts sounding. The system can be easily used in various water tanks, sump pumps, water sewage system and other places.
Sump pumps are of great help to drain out the excess water, but it requires sometimes your help too. This is the reason they come with an alarm system. But sometimes the alarm systems may ditch in various models, and this can lead to problems. Hence, along with a good quality sump pump, it is also required that you get a good quality sump pump with alarm.
Some of the amazing features of this amazing model are as following:
The model can detect unwanted level at a depth of 1/32”.
The alarm in there near the water heaters located on the floor.
The sensor comes along with a wire of about 6’.
The alarm is as loud as 110 decibels.
The system comes with the battery saver option to keep the batteries last for longer. In this case, the battery uses the energy only in the case when the alarm has to be active.
In the case of this particular model, you need to get an alkaline battery of about 9 volts that is not included with the package. The installation of the system is not that difficult, and it is the best option if you wish to get warned for any damage that is going to be caused. The circuitry system is highly reliable, and this allows the system to be installed at a number of options such as the wall, the sump it and others.