These are the main features of the Zoeller Model 95
- The equipment comes with a 5 year warranty and this is very important.
- Corrosion control: Corrosion-resistant, powder coated epoxy finish, Durable, cast iron construction.
- Sockets included: Cast iron switch case, motor, pump housing and base, Viton outer switch boot, No sheet metal parts to rust or corrode.
- All castings are cast iron class 25-30 25000 with tensile strength, Stainless steel screws, guard, handle, arm and seal assembly.
- Float: Float-operated, submersible, 2-pole mechanical switch integrating advanced switch technology, Permanent split capacitor motor, oil-filled and hermetically-sealed, automatic reset thermal overload protection.
- Internal bearings: Bearings – upper and lower oil-fed cast iron. Carbon and ceramic shaft seal, Entire unit pressure-tested after assembly, Watertight, neoprene square ring between motor and pump housing.
Operating ranges:
- Maximum temperature for effluent or dewatering: 130 ° F (54 ° C)
- Passes 1/2 ”(12 mm) spherical solids,
- No screens to clog,
- 1-1 / 2 ”NPT discharge (1-1 / 2” x 2 ”PVC adapter included with BN and BE Models).
Size:
- On point: 9-1 / 2 ”(24 cm)
- Off point: 3 ”(8 cm)
- Major width: 10-1 / 8 “(31 cm)
- Major height: 12-1 / 8 “(30 cm)
- Simplex and duplex systems available
CONCLUSION
High durability due to its cast iron housing
Great heat dissipation.
Automatic switch-off
Quality backed by the brand.
SumpPumpM95
$359.25
in stock
8 new
from $359.25
1 used from $299.99
1 used from $299.99
Amazon.com
as of February 18, 2021 4:43 pm
Features
| Part Number | 95-0001 |
